ZS Headlights

Semi-opaque coating over about 50% of the 'glass'

Detail of the right-hand side, left-hand side is not quite so bad as this.

Four headlight mounting points arrowed

First one done, you can tell by the clarity of the reflection how clear it is. The Duct tape over masking tape to protect the wing is arrowed.

All back together


Three years later bad again failing the MOT, offside worse than near ...

... but both come up bright again, this time without any dismantling, just protecting painted edges with duct tape over masking tape (so it pulls off easily).

Another two years looking much the same so just before the MOT I give them another go and a few minutes with Solvol Autosol does the job. Looks like it will be an annual job now.